Posted in quilting

Goose Purgatory

It’s Week Four on the Stay at Home Round Robin. The prompt is Flying Geese block.

In the beginning, I was happy and excited. The flying geese block is one that I have never made, so this was going to be my opportunity to try it out. I had what I believed to be a good concept for this round. So what could go wrong?

I decided to make my geese 2 by 4 inches. To make it work, I needed to bring the quilt sides up to 24 inches. I sewed on a narrow border of flowered batik fabric.

This also helps to define the pale blue octagon – a secondary shape.

To get started with the Flying Geese, I viewed this video by Patches and Poodles for making them four-at-a-time.

Her instructions were crystal clear. On Tuesday I made the first group.

These looked just great. I calculated that I would need 12 units per side, for a total of 48. The realization of the quantity and time required gave me pause. I decided to get started the next day.

Today, I started by cutting lots of squares and sewing them into shapes using the technique I had learned on Tuesday. Soon I had quite a collection of geese.

Here they are sewn and pressed

The last step is to trim them to size. That’s when things started to go side-ways.

It seems that all of my lovely geese, over which I had labored for two hours, were 1/4 inch too small!!!!!!!! I had skipped over the instruction about pressing the seams open. Missing this step was enough to throw off the measurement that critical 1/4 inch. Thus began another three or four hours of re-working my flock of geese………………

By dinner time, I had managed to salvage about twenty -four goose blocks. A day has been spent and I am only half way done, with a wad of unworkable blocks left behind.

So I am bowed, but not beaten. I will go back into the fray tomorrow, starting with more fabric and a fresh rotary blade.

Posted in knitting

Cast on Monday – Mostly Alpaca

This week-end, I cast on a shawl from yarn that was 1. in my stash and 2. frogged from a UFO. This particular pattern is a top-down triangle design with a twist – literally. By increasing more stitches on one half of the double yarnover section and using short rows, it creates a gentle slope across the back of the garment. The pattern is by Manos del Uruguay and is available free on Ravelry.

https://www.ravelry.com/patterns/library/gentle-slopes

Here are the yarns I am using.

The Letitcia is Peruvian yarn blended of wool, alpaca and silk. Gloss is a Knitpicks – super wash merino and silk. The three lace weight yarns are 100% alpaca, in my stash for so long that I no longer have the labels. Just last year I blogged about a UFO with this lighter-than-air yarn, in which I moaned about the way the stitches simply floated off the needle. To solve this problem, I am holding them TRIPLED in this project, and following with the Leticia yarn to LOCK THEM DOWN.

My variation to the pattern is the insertion of the striping row of eyelet lace. This will show up every 16 garter ridges, to break up the plain vanilla and keep things from getting too boring.

I think that the back side is just as pretty as the front side.

I like that this pattern works for mindless knitting. The pattern repeats every four rows that are easily memorized. The only hiccup I foresee is that I am going to need a longer cable very soon.

Posted in quilting

SAHRR Round 2 – Angular Puzzle

On Monday I learned that the next prompt for the stay at home quiltalong was Plus Sign. As in the past round, several challenge participants had their additions up and posted on the first day. I was not so quick to get to work. First of all, I wasn’t sure where I should place a plus sign on my project. Secondly, I wasn’t sure what technique I wanted to use I considered all of these options in turns:

  • Nine patch blocks made with contrasting strips
  • Painted on, either freehand, stamped or stencilled
  • Applique
  • Reverse applique

As I awoke this morning, I had the answer – really, it came to me just as I got out bed! I remembered this little tool stuffed away in my sewing cabinet:

I would make plus sign appliques, but I would do it with fabric strips run through the bias tape maker. This tool folds under the raw edges making a very even tape, very quickly.

It turned out to be the only part of the project that was quick.

My first goal was to bring the gray X motif, which had a prominent place on this work, to a graceful close. To do this, I cut and pieced a border using the light blue and dark grey fabrics, with the grey piece matching the angle of the X already in progress.

Here are three of these borders, sewn and ready to be pressed.

When sewn in place, the grey X get its rectangular legs finished up.

Now I am ready to add the plus signs. It’s time for the floral batik fabric to make another appearance. I cut it into four triangles to finish the corners. It is here that the plus signs will appear.

Corner triangles and tape, ready to be fused together

One of the problems I had with using the plus sign motif is that it looked like a stubby, ungraceful pair of sticks to me. To solve this issue, I decided to elongate two sides of it. The long legs will come from the edges of the triangles, with the cross happening at a right angle in the corner.

All of this sounded very simple to me, in terms of the construction steps. This is where my lack of experience kicked in. After prepping the pieces, I started sewing them in place. Nothing would line up correctly! I measured each triangle, but didn’t find anything wrong with their angles. After spending an hour or so, sewing on and removing a few triangles, I finally realized that I had failed to true up the border edges. What a rookie mistake!

Eventually I sorted out the 90 and 45 degree edges and sewed everything together.

To see some of the other quilters’ work, you can visit their posts.

Here:

Posted in knitting

Cast on Monday – Last week of the month

Having finished a pair of socks, I am beginning another knitted accessory – a cowl. I have been wanting to make one for myself in this teal color.

The yarn is a mysterious orphan ball given to me by my friend Kathy, who is in the middle of a stash-clearing phase. There’s no label, so I am guessing about the fiber. It is very soft, with a prominent halo, suggestive of alpaca. If you look closely, you will detect a bit of gold glimmer. The total weight is 80 grams, and based on its thickness I am guessing there are about 250 yards of yarn here.

I started off making this lovely cable and lace pattern, from my book “60 Quick Luxury Knits.” But the yarn revealed a structure that did not sit well with complex stitchery – it has a thick and thin composition and a loose twist which suggests to me that it might be hand spun. I started over. After six rows of garter I worked a combination of yarn overs and knit togethers to create the undulation you see.

What I do next is still unclear. The only thing I know is that it must narrow as it rises.

This knitter is open for suggestions.

Posted in quilting

Animal Friends Project Update

Block assembly on this quilt is done! Animal friends, otherwise known as Dog-house Cat-barn, is an improvisational quilt using string-pieced strips around log-cabin style center patches of dogs and cats. The whole thing was inspired by a delightful black and white print, which you can see clearly, above. I decided to make a twin-size quilt which required 12 inch blocks, each assembled from four 6 inch patches.

The rows will be spaced apart with 4 inch strips in a gray print.

I have started the quilting with the third row, which features pet condos. πŸ™‚

Pet Friendly Housing, quilted with just the walking foot.

Later today – I finished quilting this row before dinner was ready. It went very well. With a bit of effort, I could have this quilt done in a few weeks.